 |
Fiore Micro Click Firewall Adjuster |
|
$49.95 |
This adjuster locks in place every 90 degrees of turn without the use of a jam nut or set screw. A spring-loaded ball bearing clicks into a machined groove in the adjuster screw threads. The adjuster can easily be turned in either direction by hand pressure but when the ball bearing is resting in the groove, there is enough resistance to keep the adjuster screw from moving on its own. You'll notice a bearing pressed into the face of the screw. The clutch cable end passes through this bearing thus allowing the adjuster screw to be turned independently from the cable.
|
|
|
 |
Fiore Quadrant |
|
$36.95 |
For maximum efficiency quadrant should be used in conjunction with the firewall adjuster. It is a quick release design that aids in faster shifting.
|
|
|
 |
ATS COLD AIR KIT |
|
$139.00 |
Our cold air kit has no bends or curves to disturb the airflow to the mass air flow sensor. It promotes laminer airflow to the maf so you won't have any surging, idle issues or stalling problems. The kit's filter has enough surface area to flow over 1000 hp. Our adaptor is made from billet aluminum not plastic.
|
|
|
 |
|
|
|
This is the original patented Reichard Racing ultra grip pulley. Many companies have copied the look, but none have come close to the performance and quality. This pulley is made from billet aluminum and is tumble polished. No color anodizing to fade or scratch just a high luster natural finish. Pullies come in 2.75,2.80,2.85,2.90,3.00,3.10, and 3.20 sizes.
|
|
|
 |
REICHARD RACING MANUAL TENSIONER
|
|
$299.00 |
This adjustable tensioner replaces the weak stock tensioner and allows you to keep the blower tight to eliminate slip. It comes with or without spring assist.
|
|
|
 |
|
|
$329.00 |
Adding boost to your cobra also adds heat. Once the secondary charge temp reaches a certain limit the pcm pulls timing. One way to help with this problem is a more efficiant heat exchanger. Our heat exchanger has 18 fin per inch cooling surface making it one of the best made.
|
|
|
 |
ATS HEAT EXCHANGER FAN KIT
|
|
$229.00 |
When your car isn't moving no air is passing through the heat exchanger. With the ATS fan kit on your heat exchanger you'll move 80 mph air through the exchanger keeping the charge cooler by 30-40 degrees! We use high quality fans, wiring kit with severe duty relay and universal mounts.
|
|
|
 |
|
|
Black and Natural finish $214.95
Polished $249.95 |
Our fully tig welded intercooler tank holds 5 times more coolent then the stock unit. By adding more coolent you are increasing the efficiancy of the system. We also have this tank in chrome and black. (call for price)
|
|
|
 |
|
|
$159.00 |
Our 100% billet shifter has intrical coil springs instead of the factory beveled springs that cause the notchy feeling. No more missed shifts with much shorter throws. Intrical adjustable stops and a black anodized finish are some other features.
|
|
|
 |
LOWER INTERCHANGABLE PULLEY
|
|
$399.00 |
Our interchangable lower pulley kits are made by Metco Motorsports. They come with all the mounting hardware, hub and one pulley ring. Your choice of 2, 4, 6, or 8 lb boost rings.
|
|
|
 |
|
|
$189.00 |
This idler is CNC machined from 6061-T6 aluminum. Metco hardcoats the billet idler pulley so the belt doesn't scratch the surface or fade like the color anodized pullies that is not hardcoated. The bearing bore is also hardcoated for superior bore hardness. You can get the kit with either a 90mm or 100mm pulley.
|
|
|
 |
|
|
$64.00 |
These hardcoated pullies are a excellent replacement for you stock pullies. They match our idler kit pulley and look great! They come in 90mm and 100mm.
|
|
|
 |
|
|
$139.00 |
Our IRS Brace helps support you weak aluminum differential cover. Never break another cover again. This steel brace spreads load around the differential. The kit is complete with all mounting hardware.
|
|
|
 |
PORTED STOCK THROTTLE BODY |
|
CALL FOR PRICE |
Increase your throttle response and 1/4 times and keep your cobra looking stock with our new throttle body.
|
|
